Hydraulic Lifts, Ramps & Jockey Wheel. Water Filters & Reverse Osmosis.Trolleys, Broadcast Spreaders & Garden Helpers. Mini Pond & Indoor Pond. Pond Net & Cover Net. Aerating Air & Freezing Preventer. Drywall Lift & Sheetrock Lifter. AOYUE Int852A+ Hot Air Station digital SMD Rework Station. 23l/min Metallkernheizelement CPU geregelt, Temperatur- und Lufstromregelung über Taster Temperatur- und Luftstromanzeige If you have any questions - please give us this item number: 90852A+. The digital display shows the accurate set temperature as well as the current temperature air flow rate is accurately indicated by the AIR FLOW METER perfectly suitable for repairing QFP, SOP, PLCC and SOJ components integrated temperature sensor ensures a constant temperature regardless of which air flow rate was set unique 15 minute stand-by automatic Sleep Modus. As a result energy is saved, if the station is needed again just touch the handle and the preconfigurated values will be activated again! Air flow meter precisely indicates the air flow all time long Wide temperature and air flow adjustment range. The cold air cools off the heating element after use continuously, increasing the lifetime of the heating element The ideal hot air soldering station. The ideal equipment for use in the laboratory and every workshop.
It is a high-tech hot air SMD Rework Station from AOYUE. The model 852++ is easy to handle so that you have no problems when using the station!
The temperature is indicated by a digital display. The station changes to power sleep mode when the hot air gun is docked on the handle and at the same time cools down the heating element. This leads to low energy costs and a long operating life of the heating element. The temperature and the air can be adjusted by means of a selector dial. The air flow is accurately indicated by means of an air tube with a metal ball.The black coated housing is equipped with a practical carrying handle. You will also receive four different nozzles, a vacuum pen Aoyue 939 (with spare tips), so that you can work WITHOUT additional costs. The station is delivered with a transportation safety device (a red screw, which secures the pump during transportation), this has to be removed BEFORE using the station for the first time!
The station is completely operational after the screw removal. The Station has on the side a practical holder for the hot air grip that makes your work easier. 230 Volt +/-10% / 50 Hz +/-2Hz. To the holder 0.9m. 91124 - Heating air nozzle: round 2.5mm, 91130 - Heating air nozzle: round 4.4mm, 91196 - Heating air nozzle: rund 7mm, 91197 - Heating air nozzle: round 8.5mm, 939 - Vacuum Pen, Instructions in german, Instructions in english, Hot air blower-Fitting, Cold device cable - EU-Plug.Leaded soldering, Lead Free Soldering. Int852A+, Input Voltage 230-250V 50Hz. Power Consumption 500W, Temperature Range 100-480°C, Diaphragm Pump, Pump Capacity 23l/min, Metal Core Heating Element. Hot Air Gun: 20094 WilTec Art. 240 x 187 x 137 mm. This is a commercial offer. Information about the right of withdrawal and further information can be found in our "Terms and Conditions".
The item "AOYUE Int852A+ Hot Air Station digital SMD Rework Station" is in sale since Tuesday, May 17, 2016. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Other DIY Tools & Workshop Equipment". The seller is "wiltec_gmbh" and is located in Eschweiler, NRW.
This item can be shipped worldwide.